缓冲器，驱动器，接收器，收发器
结果:
16,067
Manufacturer
Series
Supplier Device Package
Package / Case
Current - Output High, Low
Voltage - Supply
Max Propagation Delay @ V, Max CL
Logic Type
Number of Bits per Element
Delay Time - Propagation
Operating Temperature
Current - Quiescent (Iq)
Output Type
Clock Frequency
Type
Current - Supply
Features
Input Capacitance
Number of Elements
Circuit
Current - Quiescent (Max)
Function
-3db Bandwidth
Number of Circuits
Interface
Applications
Slew Rate
Input Logic Level - High
Input Logic Level - Low
Current - Output / Channel
Data Rate
Number of Inputs
Output
Number of Drivers/Receivers
Current - Input Bias
Current - Output (Max)
Input
Voltage - Load
Channels per Circuit
Channel Type
Independent Circuits
Qualification
Protocol
Differential - Input
Voltage - Input Offset
Frequency
Voltage - Supply Span (Max)
Voltage - VCCA
Voltage - VCCB
Amplifier Type
Mounting Type
RF Type
Input Type
Ratio - Input
Rds On (Typ)
Fault Protection
Gain Bandwidth Product
Number of Bits
Translator Type
Voltage - Supply, Single/Dual (±)
Frequency - Max
Input Signal
Trigger Type
Duplex
Switch Type
Temperature Coefficient (Typ)
Grade
Output Signal
Voltage - Supply Span (Min)
PLL
Secondary Attributes
Supply Voltage
Standards
Number of Outputs
Divider/Multiplier
On-State Resistance (Max)
Multiplexer/Demultiplexer Circuit
Number of Taps
Receiver Hysteresis
Modulation or Protocol
Voltage - Supply (Vcc/Vdd)
Voltage - Supply, Single (V+)
Memory Type
Number of Channels
Gain
Output Configuration
Voltage Supply Source
Noise Figure
Number of Mixers
Tolerance
Configuration
Count Rate
Number of Filters
Data Interface
Current - Output Source/Sink
Tuning Voltage (VDC)
Voltage - Supply, Dual (V±)
Icc Max
2nd Harmonic, Typ (dBc)
Control Interface
Time Format
Programmable Features
Power (dBm)
Hysteresis
Logic Voltage - VIL, VIH
Propagation Delay (Max)
Size / Dimension
Current - Bias
Current - Peak Output (Source, Sink)
Bus Directional
Current - Timekeeping (Max)
Filter Type
Timing
Current - Input Bias (Max)
CMRR, PSRR (Typ)
Non-Volatile Memory
Filter Order
Rise / Fall Time (Typ)
FWFT Support
Current - Output (Typ)
Direction
Power - Output
Frequency - Center
Date Format
Access Time
Programmable Flags Support
Interrupt Output
Data Rate (Max)
Motor Type - AC, DC
Voltage - Supply, Battery
On-Chip RAM
Pushing (MHz/V)
Number of I/O
Switch Circuit
Voltage - Core
Voltage - I/O
Resistance - Wiper (Ohms) (Typ)
Frequency - Cutoff or Center
Retransmit Capability
Gate Type
Expansion Type
Technology
Step Resolution
High Side Voltage - Max (Bootstrap)
Reset
Driven Configuration
Motor Type - Stepper
Antenna Connector
Voltage - Input Offset (Max)
Clock Rate
Power (Watts)
Memory Size
Output Function
Taper
Phase Noise Typ (dBc/Hz)
Frequency Range
Current - Output
Current - Supply (Max)
Internal Switch(s)
Resistance (Ohms)
Height
Current - Transmitting
Number of Drivers
Current - Modulation
结果：16,067
.jpg "CAVC8T245QRHLRQ1")
缓冲器，驱动器，接收器，收发器
逻辑缓冲器、驱动器、接收器和收发器是数字电路中不可或缺的组件，它们使得一个电路中的逻辑信号可以与另一个电路隔离地进行访问和使用。这些组件在信号传输、信号调理和数据通信中发挥着至关重要的作用。 缓冲器，顾名思义，作为信号放大器或隔离器。它们接收输入信号并将其传递到输出端口，可以选择性地保持不变或反转。缓冲器通常用于清除弱信号或驱动需要更高电流或电压水平的负载。它们有助于确保信号完整性并防止信号传输过程中的信号降解。在布尔逻辑模拟器中，缓冲器通常用于增加信号传播延迟，实现准确的时间分析。 另一方面，逻辑接收器和收发器则方便了数据总线之间的隔离通信。接收器被设计用于接收来自传输源的信号，并提供适当的信号调理，例如电平转换和噪声滤波，然后将信号传递到接收电路。收发器将接收器和驱动器的功能结合在一起，允许双向通信，在共享总线上两个方向上进行数据传输。 这些组件在不同电路具有不同电压级别或信号要求的情况下特别有用。通过提供隔离和适当的信号调理，逻辑缓冲器、驱动器、接收器和收发器实现了不同电路模块之间的无缝可靠通信。 总之，逻辑缓冲器、驱动器、接收器和收发器在数字电路设计中发挥着重要作用。它们允许隔离访问逻辑信号，清除弱信号，驱动负载，增加传播延迟，并促进数据总线之间的通信。这些组件对于确保数字电子系统中的正确信号传输和可靠数据通信至关重要。
需要快速报价吗?
告诉我们您在找什么？